MCU serie

Short specifications

This series has an x-axis range of	1100
This series has a y-axis range of	1550
This series has a z-range of	1000
This series has a spindle rpm range of	10000 - 24000

Categorieën: Freesbank, MAS, Nieuwe machines, Mas 5-assig

Specificaties

resultaten weergeven

Zoeken:

		MCU		MCU	Spindles // Spindeln	Type // Bezeichnung		POWER PLUS	POWER	SPEED	SPEED	SPRINT	RAPID
		1100V-5X		1100VT-5X	Drive type // Antriebstyp		Direkt // Diretto	Direkt // Diretto	Direkt // Diretto	Direkt // Diretto	Direkt // Diretto	Direkt // Diretto
Maximum workpiece diameter // Max werkstuk diameter	mm		Ø 1 250		Taper – Universal // Spindelkegel		ISO 50 [HSK-A100]	ISO 50 [HSK-A100]	ISO 40	HSK-A63	HSK-A63	HSK-A63
Maximum workpiece height // Maximale werkstukhoogte	mm		1 000		Multitasking Variant // Multitaskuitvoering		Yes // Ja	No // Nein	No // Nein	Yes // Ja	Yes // Ja	No // Nein
Distance spindle to table // Afstand spindel tot tafel	mm		150 – 1 150		Taper – Multitasking // Spindelkegel multifunctionaliteit 3500	HSK-A100	-	-	HSK-A63	HSK-A63	-
X axis travel // X as	mm		1 100		Hydraulic Spindle Lock // Hydraulisch spindelslot	Yes // Ja	-	-	Yes // Ja	Yes // Ja	-
Y axis travel // Y as	mm		1 550		Max. speed // Maximale snelheid	min-1	10 000	10 000	12 000	12 000	18 000	24 000
Z axis travel // Z as	mm		1 000		Nominal speed // Nominale snelheid	min-1	850	720	2 000	2 330	2 800	4 000
Rapid traverse X, Y, Z // Ijlgang x, y, z -as	mm.min-1		50 000		Power // Aandrijfkracht	25% / 40% ED continuous // Dauer	kW	59 / 50 / 39	42 / 36 / 20	53 / 45 / 33	56 / 48 / 32	29 / 25 / 20	29 / 25 / 19
Acceleration in axes X, Y, Z // X, Y, Z acceleratie	m.s-2		5		Torque // Koppel	25% / 40% ED continuous // Dauer	Nm	654 / 579 / 451	384 / 340 / 262	243 / 215 / 160	226 / 200 / 130	153 / 135 / 87	113 / 100 / 60
Feed force X, Y, Z // X, Y, Z koppel	kN		16 / 16 / 16
Positioning accuracy // Positioneringsprecisie	mm		0.008
Repeatability // Herhaalbaarheid	mm		0.004
A axis tilt range // A-as zwenkbereik			175° (+45° / –130°)
A axis maximum speed // A-as topsnelheid	min-1		23
Accuracy of dividing A axis // A-as precisie	sec		±2
Accuracy of dividing C axis // C-as precisie	sec	±2		±1
Table clamping area size // Tafelgrootte	mm	Ø 1 150 × 900		Ø 1 200
Maximum load on the table // Max tafelbelasting	kg	2 200		1 700
Maximum speed // Maximale snelheid	min-1	80		500
Nominal speed // Nominale snelheid	min-1	23		256
Torque // Koppel	Nm	3 194		3 030
Power	kW	28		88
T-slots (aantal × breedte × afstand)	mm	7 × 22H7 × 125		10 × 22H7 × 36°
AC voltage // Spanning			3 × 400V, 50Hz
Rated current // Amperage	A		250
Total machine input // Totaal vermogen	kVA		120
Recommended power line supply // Aanbevolen stroomvoorziening	mm2		5 × 95 Cu
Pneumatic pressure // Werkluchtdruk	MPa		0.6
Compressed air consumption // Compressor luchtverbruik	m3/hod		8 - 20
Length (transport dimensions) // Lengte (transport)	mm		6 500 (5 000)
Width (transport dimensions) // Breedte (transport	mm		4 800 (2 680)
Height (transport dimensions) // Hoogte (transport)	mm		5 000 (3 600)
Machine weight // Gewicht (Transport)	kg		35 000 (30 000)

1 tot 50 van 80 resultaten

Vorige Volgende

resultaten weergeven

Zoeken:

		MCU 700VT-5X Milling / Fräsen Turning / Drehen		MCU 700V-5X Milling / Fräsen	Standard		POWER	SPEED	SPRINT	RAPID*
X as	mm		700		Drive type // Antriebstyp	-	built-in direkt	built-in direkt	built-in direkt	built-in direkt
Y as	mm		820		Gearbox // Getriebe	-	no // nein	no // nein	no // nein	no // nein
Z as	mm		550		Spindle for turning operations with a hydraulic brake // Spindel für Drehoperationen mit hydraulischer Klemmung	-	no // nein	yes / no // ja / nein	yes / no // ja / nein	yes* / no* // ja* / nein*
Work feed in axes X, Y, Z // X, Y, Z traversesnelheid	mm.min-1		1 - 60 000		Spindle taper // Aufnahmekegel	-	ISO 50	ISO 40 (HSK 63)	HSK 63	HSK 63
Rapid traverse in axes X, Y, Z // X,Y,Z Ijlgang	mm.min-1		60000		Speed range // Drehzahlbereich	min-1	20 - 10 000	20 - 12 000	20 - 18 000	20 - 24 000
Acceleration in axes X, Y, Z // X,Y,Z acceleratie	mm.s-2		6500		Spindle drive output S1/S6 (40%ED) // Leistung des Spindelantriebs S1/S6 (40%ED)	kW	20 / 26	32 / 48	25 / 35	19 / 27
Programmable increment // Stapsafstand	mm		0,001		Torque S1/S6 (40%ED) // Drehmoment S1/S6 (40%ED)	Nm	262 / 340	130 / 200	87 / 130	60 / 86
A axis tilt range // A as zwenkbereik	°		150 (+30 / -120)		Rated speed // Nenndrehzahl	min-1	800	2000	2800	3600
C axis rotation range // C as draaibereik	°		unlimited // unbegrenzt		Spindle nose distance from the rotary-tilting table (min - max) // Abstand der Spindelstirnseite zum Dreh-Schwenktisch (min - max.)	mm	110 - 660	150 -700	150 - 700	150 - 700
A axis maximum speed // Max snelheid A as	min-1		25		Spindle nose distance from the rotary- tilting table with pallet change (min - max) // Abstand der Spindelstirnseite zum Dreh-Schwenktisch mit Palettenwechsler (min - max.)	mm	35 - 585	75 - 625	75 - 625	75 - 625
C axis maximum speed // Max snelheid C as	min-1	500		100	Automatic tool change type // Werkzeugwechslertyp	-		Pick up // Kette
A, C axis calibration accuracy // A, C assen accuratesse	°		0,001		Tool holder // Werkzeughalter	-	ISO 7388/150	ISO 7388/140 (DIN 69893)	DIN 69893	DIN 69893
Table clamping area size // Tafelgrootte	mm	Ø 630 Ø 800		Ø 630 Ø 800  630	Maximum number of tools // Maximale Anzahl der Werkzeuge	-	24 / 48	32 / 64	32 / 64	32 / 64
Maximum workpiece diameter // Maximaal werkstukdiameter	mm		Ø 1 000		Maximum tool diameter // Maximaler Werkzeugdurchmesser	mm	130	80 / 130 (130)	80 / 130	80 / 130
Maximum workpiece height // Maximale werkstukhoogte	mm		500		Maximum tool length // Maximale Werkzeuglänge	mm	265	265 (410)	410	410
Maximum load on the table // Maximale tafelbelasting	kg		850		Maximum tool weight // Max. Werkzeuggewicht	kg	10	10	10	10
Table height above the floor // Tafelhoogte	mm		920		Tool change time Tool to tool / chip to chip // Werkzeugwechselzeit / Wechselzeit Span - Span	s	3 / 7	3 / 7	3 / 7	3 / 7
Positioning accuracy // Positioneringsprecisie	mm		0,004
Repeatability // Herhaalbaarheid	mm		0,007
AC voltage			3 × 400V, 50Hz
Rated current // Amperage	A		150
Total machine input // Totaal vermogen	kVA		85
Recommended power line supply // Aangeraden stroomvoorziening			4 × 95 Cu
Pneumatic equipment operating pressure // Werkdruk	MPa		0,6
Compressed air consumption (min - max) // Compressor luchtverbruik (min - max)	m3/hod		8 - 20
Machine dimensions (length × width × height) // Machineafmetingen (lengte x breedte x hoogte)	mm		4 085 × 3 460 × 3 528
Machine transport dimensions (length × width × height) // Transportmachineafmetingen (lengte x breedte x hoogte)	mm		4 085 × 2 400 × 2 950
Machine weight // Maximaal gewicht	kg		18000
Machine weight including chip conveyor // Machinegewicht inc. transporteur	kg		18450
Machine weight including pallet changer // Machinegewicht inc. Palletwisselaar	kg		19000
Machine weight including pallet changer and chip conveyor // Machinegewicht inc. Palletwisselaar en transporteur	kg		19450
		Sinumerik 840D sl Heidenhain TNC 640		iTNC530 HSCI Sinumerik 840D sl

1 tot 50 van 50 resultaten

Vorige Volgende

resultaten weergeven

Zoeken:

			MCU 450V-5X milling		MCU 450VT-5X turning
	X-axis travel	mm		450
	Y-axis travel	mm		800
	Z-axis travel	mm		400
	Distance of spindle face to table	mm		100-500
Linear axes	Work feed in axes X, Y, Z	mm.min-1		1 - 60,000
	Rapid traverse in axes X, Y, Z	mm.min-1		60000
	Acceleration in axes X, Y, Z	mm.s-2		6000
	Programmable increment	mm		0.001
	A, C axis drive		Torque motor		Torque motor
	A axis tilt range	°		±120
Rotation axes	C axis rotation range	°		Unlimited
	Max. revolutions of A axis	min-1	100		100
	Max. revolutions of C axis	min-1	200		1500
	A, C axis calibratin accuracy	°		0.001
	Table clamping area size	mm	500		500
	Maximum workpiece diameter	mm		600
Tables	Maximum workpiece height	mm		350
	Maximum load on the table	kg	500		350
	Positioning accuracy	mm		0.004
Accuracy ČSN ISO 230-2	Repeatability	mm		0.007
	Positioning accuracy	mm		0.004
Accuracy VDI/DGQ3441	Repeatability	mm		0.007
	Possitioning accuracy	mm		±0.003
Accuracy JIS B 6336	Repeatability	mm		±0.002
	AC voltage			3 × 400V, 50Hz
	Rated current	A		125
Energy connection and	Total machine input	kVA		55
consumption	Reccomended power line supply	mm2		5 × 35 Cu
	Pneumatic equipment operatin preassure	MPa		0.6
	Compressed air consumption (min - max)	m3/hod		8 - 20
	Machine dimensions	mm		3800 × 3 800 × 3 140
Machine dimensions	Machine transport dimensions	mm		3 800 × 2 300 × 2 810
	Machine weight	kg		14000
	Tool number	pcs		30 (60)
	Max. tool diameter	mm		80 / 160 (75/130)
Tool magazine	Max. tool weight	kg		6.5 (8)
	Max. length of teh tool	mm		300
	Time of replacement (tool - tool)	s		2.5 (3)
				HEIDENHAIN TNC 640
Control system				SIEMENS SIN 840D SL

1 tot 40 van 40 resultaten

Vorige Volgende

View machine	MCU 450
View machine	MCU 700
View machine	MCU 1100

Besturing	Siemens, Heidenhain
x-bereik	1100
Type machine	Freesbank
y-bereik	1550
z-bereik	1000
spindelbereik	10000 – 24000

MCU serie

MCU serie

Brochure

Specificaties

Gerelateerde producten

VMX 30 i

VM 10 i Plus

MCV 754 Quick

VMX 24 Di